1. Attach side rails 3 (x2) to headboard 1 and
footboard 2 using 8 x bolts (A), 8 x plastic washers
(E)
and 8 x metal washers (F). Tighten using Allen key
(G)
NOTE: Ensure the threaded insert holes in cross bars 4
(x2) are facing downwards
STEP TWO
STEP ONE
1.Attach Foot Slider (9) to Headboard 1 and
Footboard 2
by using Bolts (B), Metal Washer (F)and tightening
with
Allen key (G).Peel the rear tape from the Foam Pads
(12)
and stick them to the base of the Foot Slider (9).
STEP THREE
1. Attach cross bars 4 (x2) to the brackets on side rails 3
(x2) using 4 x bolts (A) and 4 x metal washers (F). Tighten
with Allen key (G).
Page 3 of 5
