Assembly instructions
HUXLEY WALL MIRROR
2
3
Produced in
China
for Next Retail Ltd.
169380-2014-V1
3
Drill two holes and insert an appropriate wall
plug into each. Insert the screws and tighten,
leaving the screw head exposed by about 1/4
inch(6mm).
WARNING: Always ensure intended wall area
to be drilled is free from hidden electrical
wires, water and gas pipes.
6mm
not supplied
not supplied
PH2
not supplied
Lift the mirror into position ensuring that the
fixing clips attached to the mirror are firmly
hooked over the screw heads.
Check the mirror periodically to see that no fitting
has loosened and needs attention.
169380
