NEXT
HFA
115s/
HFA
115sHP
- User Manual
www.next-proaudio.com
- 4 -
V201609
HFA115s(HP) POWER AMPLIFIER AND DSP
The HFA115s as all HFA series models, was designed
to achieve a simple to use and deploy versatile system.
The amplifier is designed to power not only the HFA115s
itself, but also any passive satellite or group of satellites,
as long as the minimum total impedance doesn’t reach
below 4
Ω
. The HFA115s, like all HFA series models, is
prepared to be completely plug n’ play, having already
six pre-determined configurations that cover almost all
situations. But if you’re not happy with any of those,
there are also two available user defined configurations,
which can be used to adapt the system to your needs
using the NEXT-proaudio SOUNDWARE
1
software and
the supplied RS485 to USB converter.
Here is a brief description of the amplifier panel:
1-
Signal Input/Output
2-
Level Adjustment Potentiometer
3-
Preset Selector
4-
RS485 Communication Interface
5-
List of Available Presets
6-
Satellite Output (ONLY on HFA115s)
7-
AC Mains Power Input/Output
8-
Protection Circuit Breaker
9-
Power On/Off Switch
1
Download NEXT-proaudio SOUNDWARE at www.next-proaudio.com/downloads
1
2
3
4
6
9
5
7
8
Never operate the HFA Series speakers
in a way that maintains the Limiter Led
consistently on.
HFA115s Preset List:
0- Deep (LP80Hz): Low-pass filter at 80Hz 24dB/Oct Linkwitz-Riley
1- Punch (LP100Hz): Low-pass filter at 100Hz 24dB/Oct Linkwitz-Riley
2- Extended (LP120Hz): Low-pass filter at 120Hz 24dB/Oct Linkwitz-Riley
3- No LP: No Low-pass filter used (can be defined by user)
4- Sub+Satellite (Flat): Flat frequency response with the satellite designated on “Programmed Satellite” label
5- Sub+Satellite (Music): Frequency response adapted for music reproduction with the satellite designated on
“Programmed Satellite” label (Ear compensation, due to high SPL levels, at the mid-high frequency range)
6 / 7- User Defined: Free memory for user storage (OUTPUT is muted by default)
