2
HARDWICK GLASS SHELF
394949
Assembly instructions
BEFORE YOU START
Produced in China for Next Retail Ltd.
394949-2016-V1
Time to assemble
Missing parts
If you are missing any fixtures and fittings for your
product please contact our customer service team on
0333 777 8999 and they will be happy to arrange for a
replacement to be sent to you free of charge.
Home service technicians
If you have a fault with your product please contact our
customer service team on 0333 777 8999. If you have
had the product for 28 days or less you may be offered a
replacement, refund or for a fully trained home service
technician to visit your home to assess the fault and
repair the product where possible. If you have had the
product for more than 28 days we will send an
independent home service technician to review and
repair the product where possible and recommend
further action.
You can write to us at
Home Customer Services
Next Retail Ltd,
Desford Road,
Leicester,
LE19 4AT
To View our full furniture range please visit www.next.co.uk
Tools required
We suggest you retain these instructions for future reference
Keep fittings out of children’s reach and keep children well
away from construction area.
This product should only be used on firm, level ground
Please periodically check all fittings and re-tighten as
necessary.
Please do not sit or stand on your table.
Avoid exposing the furniture to excessive heat or direct
sunlight as this can cause cracking of the wood and
deterioration of the colour.
Unwrap all packaging materials and place the components
on top of the carton box or on a clean floor to protect it
from damage.
We suggest you spend a short time reading through this
leaflet before you start
When you are ready to start, make sure that you have the
right tools and plenty of space.
Unwrap all packaging materials and place the components
on a clean surface to protect it from damage,
We recommend that the packaging is used to protect the
surfaces during assembly.
Carefully check that you have all the parts before beginning
assembly.
Due to the size of the product we recommend that it is
assembled in the room intended for use.
Ensure the product is fully assembled as illustrated and all
fixings fully tightened before use. Check fixings regularly to
ensure they remain tight.
When moving furniture never drag the pieces across the
floor, as this will cause damage to the joints.
Apply Adhesive substrates for example, sticky tape to the
product.
Do not use silicone based furniture polish. Silicone in
furniture polishes can break down the lacquer finish.
If the glass is chipped or broken, stop using the product and
consult Next.
Do not place very hot or very cold items on the glass
surface, unless adequately thick table mats are used
to prevent such items from coming into contact with
the glass.
Do not use glass as a chopping surface. Do not strike
the glass with hard or pointed items.
When cleaning glass panels use a damp cloth with washing
up liquid or soft soap if necessary. Do not use washing
the glass.
The glass used in this product is toughened and complies
with BS EN 12150-1:2009.
powders or any other substances containing abrasives since
these substances can scratch
.
30Minutes
not supplied not supplied
supplied
supplied
Don’ts
Do’s
