511731
511731
Warnings
Don'ts
BEFORE YOU START
If you are missing any fixtures and fittings for your product
please contact our customer service team on
0333 777 8999
and they will be happy to arrange for a replacement to be sent
to you free of charge.
Home service technicians
If you have a fault with your product please contact our
customer service team on
0333 777 8999.
If you have had the
product for 28 days or less you may be offered a replacement,
refund or for a fully trained home service technician to visit your
home to assess the fault and repair the product where possible.
Desford Road,
Leicester,
LE19 4AT,
To view our full furniture range please visit www.next.co.uk
1
We
suggest
you
retain
these
instructions
for
future
reference.
Keep
fittings
out
of
children's
reach
and
keep
children
well
away
from
construction
area.
Please
do
not
jump or stand on your bed.
Avoid
exposing
the
furniture
to
excessive
heat
or
direct
sunlight
as
this
can
cause
deterioration
of
the
colour.
Please periodically check all fittings and re-tighten as necessary.
This product should only be used on firm, level ground.
Number
of
people
required
to
assemble
Missing parts
Produced in China for Next Retail Ltd
WARNING:
WARNING:
WARNING:
WARNING:
WARNING:
WARNING:
30 minutes
MBD8847
This bed conforms to BS 8509:2008 + A1:2011
Do not place this child's bed near heat sources,
windows and other furniture.
Do not use this child's bed if any part is broken,
torn or missing.
Assembly by adult only.
All assembly fittings should always be tightened
properly and checked periodically.
Not suitable for children under 4 years.
Once assembled this bed is not designed to be
disassembled and reassembled. Children are likely to play,
bounce, jump and climb on beds, therefore the child's bed should
not be placed too close to other furniture or windows, blind cords,
curtain pulls or other strings or cords and should be placed either
tight to any wall or have a gap of 300mm between the wall and the
side if the bed. The size of the mattress to be used with the child's
bed is 900mm x 1900mm.
Do not drag your assembled bed. Always lift the bed and check
that the centre support rail is securely fixed in place.
Do not use silicone based furniture polish. Silicone in furniture
polishes can break down the lacquer finish.
Apply adhesive substrates of example, sticky tape to the product.
If you have had the product for more than 28 days we will send
an independent home service technician to review and repair
the product where possible and recommend further action.
You can write to us at
Home Customer Services
Next Retail Ltd,
Do's
We suggest you spend a short time reading through this leaflet
before you start.
When you are ready to start, make sure that you have the
right tools, plenty of space.
Unwrap all packaging materials and place the components
on a clean surface to protect them from damage.
We recommend that the packaging is used to protect the
surfaces during assembly.
Carefully check that you have all the parts before beginning
assembly.
Ensure the product is fully assembled as illustrated and all
fixings are fully tightened before use. Check fixings regularly
to ensure they remain tight.
Always ensure that protectors are used on the legs according to
your flooring type.
When adjusting the support legs ensure that the foot is set 10mm
from the floor surface without the mattress in place. When in use
the legs will creat
e
the required support.
To clean your item, please use a soft cloth slightly dampened
with water and wipe clean. Then buff with a dry clean cloth.
HANSON SINGLE BED
Assembly instructions
340602
Summary of Contents for HANSON 340602
Page 1: ......