Assembly instructions
2
FLORENCE SLIM BEDSIDE
317096
Produced in China for Next Retail Ltd.
317096-2018-V1
BEFORE YOU START
Warnings
Don
’
ts
Missing parts
If you are missing any fixtures and fitting for your product please
contact our customer service team on 0333 777 8999 and they will be
happy to arrange for a replacement to be sent to you free of charge.
Home service technicians
If you have a fault with your product please contact our customer
service team on 0333 777 8999. If you have had the product for 28
days or less you may be offered a replacement, refund or for a fully
trained home service technician to visit your home to assess the fault
and repair the product where possible. If you have had the product for
more than 28 days we will send an independent home service
technician to review and repair the product where possible and
recommend further action.
You can write to us at
Home Customer services
Next Retail Ltd,
Desford Road
Leicester
LE19 4AT
To view our full furniture range please visit
www.next.co.uk
Single person assembly
Number of people required to assemble
Time to Assemble
We suggest you retain these instructions for future reference
Keep fittings out of children
’
s reach and keep children well away
from the construction area
This product should only be used on firm, level ground Please
periodically check all fittings and re-tighten as necessary Please
do not sit or stand on your furniture
Avoid exposing the furniture to excessive heat or direct sunlight
as this can cause deterioration of the colour
Unwrap all packaging materials and place the components on
top of the carton box or on a clean floor to protect it from damage
We suggest you spend a short time reading through this leaflet
before you start
When you are ready to start, make sure that you have the right
tools and plenty of space
Unwrap all packaging materials and place the components on a
clean surface to protect it from damage,
We recommend that the packaging is used to protect the
surfaces during assembly
Carefully check that you have all the parts before beginning
assembly
Due to the size of the product we recommend that it is
assembled in the room intended for use
Ensure the product is fully assembled as illustrated and all
fixings fully tightened before use
The product complies with
BS 4875-7:2006 leve13
EN 14749 : 2016
Do not drag or pull your furniture
Do not use silicone based furniture polish. Silicone in furniture
polishes can break down the finish
Do not place very hot or very cold items on the glass surface,
unless adequately thick table mats or
coasters are used to prevent such items from coming into
contact with the glass
Do not use glass as a chopping surface. Do not strike the glass
with hard or pointed items
30 minutes
Tools required
supplied
PRODUCT SUPPLIED WITH WALL FIXING
STRAPS
