With
MODE
key (Fig.7) find the text like in (Fig.8).
To change the setting hold
SET
key (Fig.9) until the first value starts
blinking (Fig.10).
Use
UP/DOWN
keys to change the value (Fig.11).
Use
MODE
key to move to the next value (Fig.7).
When finished, confirm with
SET
key (Fig.9)
The range of DMX channels to transmit must correspond to the chan-
nels used by the projectors connected to the paired receivers on band 1.
You should set such projectors on consecutive DMX addresses.
N
N..B
B..:: If you get problem of transmission, try changing the Radio channel.
When Radio channel is modified, receivers start searching until they find the
new Radio channel.
Slow blinking:
Transmitter O
OK
K, no D
DM
MX
X 5
51
12
2 signal.
Switched on :
Transmitter O
OK
K, D
DM
MX
X 5
51
12
2 signal O
OK
K.
This function allows to set the range of DMX channels to transmit on band
1 (RED LED) to the paired receivers and the RADIO channel to use, among
the ten available (from 0R to 9R).
4.2
SETTING OF TX1
4.3
LED 1 FUNCTION (RED)
Fig. 7
TX1
:
1 - 48 C
:
0R
Fig. 8
Fig. 10
SET
Fig. 9
TX1
:
1 48 C
:
0R
Fig. 11
MODE
