COMPTON MIDI SLEEPER
352998, 434408, 397772
Assembly instructions
Produced in Poland for Next Retail Ltd.
2
352998-2016-V1, 434408-2016-V1, 397772-2016-V1
30 MIN
Number of people required to assemble
Two persons are required to assemble this item.
Time to assemble
Missing parts
not supplied
Ph2
2 PERSON
BUILD
Tools required
If you are missing any fixtures and fittings for your product please
contact our customer service team on 0333 777 8999 and they
will be happy to arrange for a replacement to be sent to you free
of charge.
Home service technicians
If you have a fault with your product, please contact our customer
service team on 0333 777 8999. If you have had the product for
28 days or less you may be offered a replacement, refund or for a
fully trained home service technician to visit your home to assess
the fault and repair the product where possible. If you have had
home service technicia n to review and repair the product where
possible and recommend further action.
You can write to us at
Home Customer Services
Next Retail Ltd.
Desford Road,
Leicester,
LE19 4AT
To view our full furniture range please visit www.next.co.uk
BEFORE YOU START
the
for more than 28 days we will send an independant
product
not supplied
TO NO
TIME
7 mm
IMPORTANT - RETAIN FOR FUTURE REFERENCE - READ
CAREFULLY.
This child's bed conforms to BS EN 747-1:2012 + A1 2015
WARNINGS
Routinely check that the upper safety rail and ladder attachment is secure
and tighten any fittings using the appropriate tools
All assembly fittings shall always be tightened properly. Screws shall not
be loose because a child can squeeze parts of the body, or clothing (e.g.
strings, necklaces, ribbons for babies, dummies, etc.) could get caught.
There would be danger of strangulation.
WARNING:
Children can become trapped between the bed and the
wall. To avoid risk of serious injury the distance between the top safety
barrier and the wall shall not exceed 75mm or shall be more than 230mm
WARNING:
Do not use this child's bed if any part is broken, torn or
missing
WARNING:
High beds and the upper bed of bunk beds are not suitable
for children under six years due to risk of injury from falls
Do not leave items such as ropes, strings, cords, harnesses and belts
attached to or hung to the bunk/high bed due to the risk of strangulation
Children are likely to play, bounce, jump and climb on beds, therefore the
child's bed should not be placed too close to other furniture or windows,
and should be placed either tight to any wall or have a gap of 300mm
between the wall and the side of the bed
Do's
Always follow the manufacturer's instructions;
Ventilation of the room is necessary in order to keep the humidity low and
to prevent mould in and around the bed;
When you are ready to start, make sure that you have the right tools and
plenty of space
Due to the size of the product we recommend that it is assembled in the
room intended for use
Unwrap all packaging materials and place the components on a clean
surface to protect it from damage
We recommend that the packaging is used to protect the surfaces during
assembly
Carefully check that you have all the parts before beginning assembly
To clean your item, wipe with a soft cloth slightly dampened with water.
Then buff with a dry clean cloth
This bed is designed to be used with a mattress with the following
dimensions H17 x W90 x D190cm.
Please ensure that the mattress depth does not go past the permanent
mark on the post/Upper Safety Barrier
Please periodically check all fittings and re-tighten as necessary
Don'ts
Do not drag or pull your furniture
Do not use silicone based furniture polish. Silicone in furniture polishes
can break down the finish
Do not stand or jump on this product
Summary of Contents for COMPTON MIDI SLEEPER
Page 2: ......
