8
7
8
Produced in China for Next Retail Ltd.
382506-2014-V1
CANTERBURY BED
– DOUBLE
382506
Assembly instructions
1. Attach 15 x slat centre caps (8) onto
the ends of each slat assembly already
part assembled. Firmly press in place
the caps into the holes in the side and
centre rails. Ensure the curve of the
slats facing upwards.
2. Ensure the end of the straps are
wrapped around support rails (5)
tightly.
IMPORTANT: Once the feet (part
6) have been assembled and
attached they should be adjusted
to ensure they do not touch the
floor (5mm above floor) to allow
for movement once the mattress
is placed on the bed frame.
It is important to note that when
moving the bed ensure that it is
not dragged into its new position
to prevent the possibility of these
feet being twisted or angled to
one side which could lead to the
collapse of the centre of the bed.
Remove the mattress and lift the
bed into its new position to avoid
damaging the bed. Ensure the
feet are at 90۫ to the floor before
replacing the mattress.
8
