Next BARLOW 802062 Assembly Instructions Manual Download Page 3

Page: 3 / 9

- Attach 8 x cambolts (B) into the holes on panel 1.

- Turn clockwise with cross-blade screwdriver to tighten.

Recommend to use cross-blade screwdriver.

- Insert 1x wooden dowel (C) into the hole on panel 8.

- Attach panel 8 to panel 2 using 1 x screw (I) and tighten by
turning clockwise with cross-blade screwdriver.

- Insert 2x camlocks (A) into the holes of panel 3L and ensure

that arrow indicator is pointing towards the panel edge

- Attach 4x cambolts (B) and 2x wooden dowels (C) into the
holes

on panel 3L.

Recommend to use cross-blade screwdriver.

STEP TWO

STEP THREE

STEP ONE

3 of 9

Summary of Contents for BARLOW 802062

Page 2: ... PARTS 1x1 2x1 3Lx1 3Rx1 4x1 5x1 6x1 7x1 8x1 9x2 10Lx2 10Rx2 11x2 12x2 13x2 FITTINGS 15x12 mm 7 5X32 mm 8x32 mm F6x13 mm 7 5X15 mm P4x15 mm 25x30 mm Ax30 Bx30 Cx33 Dx8 Ex4 Fx2 Gx2 F10x70 mm F6x30 mm 350 mm 350 mm 2 of 9 ...

Page 5: ...el 5 7 and 6 to panel 3R and tighten using the 4x camlocks A Turn camlocks clockwise with a flat blade screwdriver until tight Attach panel 3L to the assembled using 4 x camlocks A Turn camlocks clockwise with a flat blade screwdriver until tight STEP NINE STEP SEVEN STEP EIGHT 7 5 6 6 3R 3R 3L 5 6 6 3L 3R 7 7 5 5 of 9 ...

Page 8: ...t panel 13 to the recessed grooves of panel 10L 10R and 12 Repeat this step for the second drawer Attach panel 9 to the assembled unit and tighten using 3x camlocks A by turning clockwise with a flat blade screwdriver Repeat this step for the second drawer STEP SIXTEEN STEP SEVENTEEN STEP EIGHTEEN 12 10L 11 12 11 10R 10L 12 11 10R 13 9 13 10L 10L 12 11 10R 9 8 of 9 ...

Page 9: ...r LL to the assembled unit using 2x screws D Repeat this step for the second drawer Insert the drawers into the assembled unit The coffee trunk is ready for use Next Retail Ltd Desford Road Leicester LE19 4AT STEP NINETEEN STEP TWENTY 10R 10R 9 10L 6 2 10L 3L 1 9 10R 9 10L 10R 3R 9 of 9 ...