1. Attached door (7) to the unit as shown.
2. Adjust hinges to the correct positions refer to
diagrams,then tighten screws with a screwdriver.
1. Push the drawer into the unit.
2. Insert paper cards P into both handles as shown.
1. Fasten wall strap S and flat washer R to the back end
of the top panel using 1 x screw Q with a screwdriver.
2. Move the table into the required position and fasten
the loose end of the wall strap to the wall using a
suitable screw and rawl plug for your wall type.
WARNING: Always ensure the area to be drilled is free
from hidden electrical wires and water or gas pipes.
Next Retail Ltd, Desford Road, Leicester, LE19 4AT
STEP SEVEN
STEP EIGHT
NOTE: Wall fixings are not included, source suitable
fixings for your wall type. If in doubt consult a qualified
tradesperson.
STEP NINE
Page 6 of 6
