Next 926439 Assembly Instructions Manual Download Page 3

next

2

Produced in China for Next Retail Ltd.

926439-2019-V1

BEFORE YOU START

Warnings

Do

s

Don

ts

Missing parts

If you are missing any fixtures and fitting for your product please

contact our customer service team on 0333 777 8999 and they will be
happy to arrange for a replacement to be sent to you free of charge.

Home service technicians

If you have a fault with your product please contact our customer

service team on 0333 777 8999. If you have had the product for 28
days or less you may be offered a replacement, refund or for a fully
trained home service technician to visit your home to assess the fault
and repair the product where possible. If you have had the product for

more than 28 days we will send an independent home service

technician to review and repair the product where possible and

recommend further action.

You can write to us at

Home Customer services
Next Retail Ltd,
Desford Road
Leicester
LE19 4AT

To view our full furniture range please visit
www.next.co.uk

We suggest you retain these instructions for future reference.

Keep fittings out of children

s reach and keep children well away

from the construction area.

This product should only be used on firm, level ground. Please

periodically check all fittings and re-tighten as necessary. Please
do not sit or stand on your furniture.

Avoid exposing the furniture to excessive heat or direct sunlight
as this can cause deterioration of the colour.

Unwrap all packaging materials and place the components on

top of the carton box or on a clean floor to protect them  from
damage.

We suggest you spend a short time reading through this leaflet

before you start.

When you are ready to start, make sure that you have the right
tools and plenty of space.

Unwrap all packaging materials and place the components on a

clean surface to protect it from damage,

We recommend that the packaging is used to protect the
surfaces during assembly.

Carefully check that you have all the parts before beginning
assembly.

Due to the size of the product we recommend that it is

assembled in the room intended for use.

Ensure the product is fully assembled as illustrated and all

fixings fully tightened before use.

The product complies with 

BS 4875-7:2006 and

EN 14749 : 2016

Do not drag or pull your furniture.
Do not use silicone based furniture polish. Silicone in furniture
polishes can break down the finish.

Do not place very hot or very cold items on the glass surface,
unless adequately thick table mats or coasters are used to
prevent such items from coming into contact with the glass.

Do not use glass as a chopping surface. Do not strike the glass

with hard or pointed items.

PRODUCT SUPPLIED WITH WALL FIXING  "L"
BRACKETS

FLORENCE TRIPLE ROBE

Assembly instructions

926439

Not supplied

2 person assembly

Number of people required to assemble

Time to Assemble

30 minutes

Tools required

supplied

next

TO NO TIME

Summary of Contents for 926439



















Reviews: