1. Glue(D) and insert 6 x wooden dowels (C) into panel 1
and attach panels 5(x2) & 6 to panel 1.
2. Insert 3 x camlocks (B) into panels 6 & 5(x2) and tighten
with a screwdriver.
Ensure the arrow indicator is pointing towards the panel
edge and ensure the assembly bolt locates properly into
the camlock before turning
1. Slide panels 4(x2) into the assembled unit as shown in
diagram.
1. Glue(D) and insert 6 x wooden dowels (C) into panels
5(x2) & 6 and attach panel 2 to panels 5(x2) & 6 .
2. Insert 3 x camlocks (B) into panels 6 & 5(x2) and tighten
with a screwdriver.
Ensure the arrow indicator is pointing towards the panel
edge and ensure the assembly bolt locates properly into
the camlock before turning
STEP THREE
STEP FOUR
STEP TWO
Groove
Page 3 of 6
