1. Glue and insert 4 x wooden dowels (A) into panels
panels 5 , 7 & 6 (x2) .
2. Glue and insert 3 x wooden dowels (B) into panel 3
and attach panel 1 to panels 5 , 7 & 6 (x2)
3. Insert 8 x camlocks (D) into panels 3, 5 , 7 & 6 (x2)
and tighten with a screwdriver.
Ensure the arrow indicator is pointing towards the
panel edge and ensure the assembly bolt locates
properly into the camlock before turning
1. Attach 2 x hinges (F) to panel 4 with 4 × screws (G)
by using a screwdriver until tight.
2. Attach panel 4 to panel 2 with 4 × screws (G) through
2 x hinges (F) by a screwdriver.
To align doors use the adjustment diagram
below.
STEP SIX
STEP FIVE
LATERAL
VERTICAL
FRONT- TO-BACK
1. Attach hinge (J) to panels 4 & 7 with 4 × screws (L)
by using a screwdriver until tight.
2. Attach hinge (K) to panels 4 & 5 with 4 × screws (L)
by using a screwdriver until tight.
3. Use 12 x stickers (I) to cover the camholes .
4. Attach 1 x handle (H) to the panel 4 with 2 x bolts
provided
STEP SEVEN
Page 4 of 6
