1. Insert 4 x wooden dowels (A) to foot board 1.
2. Insert 2 x barrel nuts (E) to side panel 2 and
side panel 3.
3. Attach foot board 1 to side panel 2 and side
panel 3 with 2 x bolts (B), 2 x bolts (C) and 4 x
washers (F) using allen key (H) and tighten.
1. Attach ladder side panel 4 (both L & R ) to side
panel 2 with 2 x bolts (D) and tighten with a
screwdriver.
1. Attach 2 x slats 5 (these must be positioned at
each end of the bed base) and 14 x slats 6 to
assembled unit with 64 x screws (G) and tighten
with a screwdriver.
STEP THREE
STEP FOUR
STEP FIVE
Page 3 of 5
