Next 882462 NAVY RED BOYS TOY BO Assembly Instructions Manual Download Page 1

Tools Needed

Helpline

If you have any problems with this product or 
require any replacement fittings please contact 
Customer Services Tel: 0844 844 8999

ASSEMBLY INSTRUCTIONS.

Regrettably self assembly items cannot be returned once assembly is part or fully completed unless the item is 
found to be faulty. Should you need to return the unassembled product, please repack in the original packaging.

IMPORTANT

• We recommend that the packaging is used to protect the surfaces during assembly.

• We suggest you spend a short time reading through this leaflet and then follow the simple step-by-step instructions. 

IMPORTANT - RETAIN FOR FUTURE REFERENCE - READ CAREFULLY.

• Keep fittings out of children's reach and keep children well away from the construction area.

• Carefully check that you have all parts before beginning assembly.

• All assembly fixings should always be tightened properly and periodically check all fixings and tighten if necessary.

• Do not put hot dishes directly on the surfaces of the item.
• Avoid keeping furniture in direct sunlight or close to any heat sources as this can cause cracking, discolouration or 
warping.
• Never drag pieces of furniture across the floor as this will cause damage to the joints.

• A minimum of 2 persons is required to assemble this product.
• Not suitable for use in bathrooms.

• Do not rub or scrub the surface when cleaning.
• Always use a non-silicone based furniture polish. Silicone in furniture polishes can break down the lacquer finish.

• Ensure the product is protected with mats and coasters when items are placed on the surfaces, to prevent 
scratching or damage.

• Any spills should be removed immediately with a soft clean damp cloth and dried immediately.

• For general cleaning, periodically dust with a soft cloth.

• Made from MDF with a painted finish.
• Made in China.

PRODUCT INFORMATION

CARE INSTRUCTIONS

 882462 NAVY RED BOYS TOY BO

 

Page 1 of 8

Summary of Contents for 882462 NAVY RED BOYS TOY BO









Reviews: