1. Put pebble bed 2 onto the vessel as shown.
1. Use a pencil to mark the fixing position on the wall.
STEP FOUR
STEP ONE
STEP TWO
STEP THREE
3. Secure brackets (A) to the wall with appropriate
screws. Tighten with a screwdriver.
WARNING: Ensure the area to be drilled is free from
hidden electrical wires and water or gas pipes.
NOTE: Wall fixings are not included. Please source
suitable wall fixings for your wall type, if in doubt consult
a qualified tradesperson.
1. Lift the suite on to the wall brackets as shown in the
diagram.
NOTE: Two people are needed for this step and this will
involve some angling of the suite to get the correct
position.
2. Drill four holes and insert an appropriate wall plug into
each.
1. Put pebbbles 3 to cover the pebble bed evenly.
NOTE:
You can adjust how the light filters through by slightly
adjusting the position of the pebbles once the unit is
switched on.