1.
Attach 2 x support rails (6) to 2 x side rails (4) with
4 x bolts (B), 8 x washers (E) and 4 x nuts (G), using
allen key (H) and spanner (I) to tighten.
1. Insert 30 x plastic caps (K) onto both ends of each
slat of the wooden slat assembly (5) . Ensure the
curve of the slats are facing upwards with the pins in
the caps facing downwards.
2. Insert plastic end caps (K) of the wooden slat
assembly (5) into the holes in side rails (4). Ensure the
curves of the slats are facing upwards.
3. Ensure the ends of the strap are wrapped around
support rails (6).
STEP THREE
STEP FOUR
STEP FIVE
Next Retail Ltd, Desford Road, Leicester, LE19 4AT
Page 3 of 3
