Assembly instructions
3 DRW BEDSIDE
140777/880981/350834
Produced in China for Next Retail Ltd.
140777/880981/350834-2019-V1
Don'ts
Do not tighten screws until fully assembled.
Do not over tighten screws or bolts.
Do not drag or pull your furniture.
Do not use this product if parts are missing, damaged or worn.
Never use scourers, abrasives or chemical cleaners.
Number of people required to assemble
BEFORE YOU START
If you are missing any fixtures and fittings for your product
please contact our customer service team on
0333 777 8999
and they will be happy to arrange for a replacement to be sent
to you free of charge.
Home service technicians
If you have a fault with your product please contact our
customer service team on
0333 777 8999.
If you have had the
product for 28 days or less you may be offered a replacement,
refund or for a fully trained home service technician to visit your
home to assess the fault and repair the product where possible.
If you have had the product for more than 28 days we will send
an independent home service technician to review and repair
the product where possible and recommend further action.
You can write to us at
Next Retail Ltd,
Desford Road,
Leicester,
LE19 4AT,
To view our full furniture range please visit www.next.co.uk
Home Customer Services
Missing parts
3
0min
TO NO TIME
Warnings
We suggest you retain these instructions for future reference.
Keep fittings out of children's reach and keep children well away
from construction area.
This product should only by used on firm ,level ground.
Please periodically check all fittings and re-tighten as
necessary.
Please do not stand on your furniture.
Avoid exposing the furniture to excessive heat or direct
sunlight as this can cause deterioration of the colour.
Do's
Ensure USB devices are unplugged after charging to avoid
overheating.
W
Wee ssugg
uggeesstt yyoouu sspen
pendd aa sshhoorrtt ttiim
mee rrea
eaddiinngg tthhrroug
oughh tthhiiss
lleeaafflleet
t
before you start.
When you are ready to start, make sure that you have the
right tools, plenty of space.
Due to the size of this product we recommend that it is
assembled in the room intended for use.
Unwrap all packaging materials and place the components
on a clean surface to protect them from damage.
We recommend that the packaging is used to protect the
surfaces during assembly.
Carefully check that you have all the parts before beginning
assembly.
Ensure the product is fully assembled as illustrated and all
fixings are fully tightened before use. Check fixings regularly to
ensure they remain tight.
Never allow any kind of liquid to remain on your furniture.
Absorption can cause materials to warp or finishes to
de
-
laminate.
To clean your item, please use a vacuum or lightly brush clean.
Do not leave items plugged into USB ports in un-ventlated and
confined spaces, this could cause the device overheat.