NEXT
HFA
112 -
User Manual
www.next-proaudio.com
- 4 -
V201609
•
Do not use hardware that isn’t load rated or that its rating is not enough to handle the
system’s weight with a good safety factor (minimum 4:1).
•
Suspended systems installation should only be carried out by qualified personnel.
•
Always use adequate protective clothing and equipment to prevent possible injuries.
•
Be sure you understand all local and national regulations regarding equipment
installation.
HFA112 POWER AMPLIFIER
AND DSP
The HFA112 was designed to achieve a simple to use
and deploy versatile system. The HFA112, like all HFA
series models, is prepared to be completely plug’ n
play, having already six pre-determined configurations
that cover almost all situations. But if you’re not happy
with any of those, there are also two available user
defined configurations, which can be used to adapt
the system to your needs using the NEXT-proaudio
SOUNDWARE
software and the supplied RS485 to
USB converter.
Here is a brief description of the amplifier panel:
1-
Signal Input/Output
2-
Level Adjustment Potentiometer
3-
Preset Selector
4-
RS485 Communication Interface
5-
List of Available Presets
6-
AC Mains Power Input/Output
7-
Protection Circuit Breaker
8-
Power On/Off Switch
1
Download NEXT-proaudio SOUNDWARE at www.next-proaudio.com/downloads
Never operate the HFA series Speakers
in a way that maintains the Limiter Led
consistently on.
1
2
3
4
5
7
6
8
