NEXT
HFA
108 -
User Manual
www.next-proaudio.com
- 4 -
V201609
•
Do not use hardware that isn’t load rated or that its rating is not enough to handle the
system’s weight with a good safety factor (minimum 4:1).
•
Suspended systems installation should only be carried out by qualified personnel.
•
Always use adequate protective clothing and equipment to prevent possible injuries.
•
Be sure you understand all local and national regulations regarding equipment
installation.
HFA108 POWER AMPLIFIER
AND DSP
The HFA108 was designed to achieve a simple to use and
deploy versatile system. The HFA108, like all HFA series
models, is prepared to be completely plug’ n play, having
already six pre-determined configurations that cover
almost all situations. But if you’re not happy with any of
those, there are also two available user defined
configurations, which can be used to adapt the system to
your needs using the NEXT-proaudio SOUNDWARE
software and the supplied RS485 to USB converter.
Here is a brief description of the amplifier panel:
1 - Signal Input/Output
2 - Level Adjustment Potentiometer
3 - Preset Selector
4 - RS485 Communication Interface
5 - List of Available Presets
6 - AC Mains Power Input/Output
7 - Power On/Off Switch
1
Download NEXT-proaudio SOUNDWARE at www.next-proaudio.com/downloads
Never operate the HFA series Speakers
in a way that maintains the Limiter Led
consistently on.
1
2
3
4
5
6
7
