![Next Network NEXT-POE4008L2-130 User Manual Download Page 38](http://html1.mh-extra.com/html/next-network/next-poe4008l2-130/next-poe4008l2-130_user-manual_1683639038.webp)
38
Trap Security Name
Displays the Trap security Name
(It is only available for SNMP v3)
WEB Interface
To setup SNMP System & Trap Configuration
A.
Clicks
Configuration/Security/Switch/SNMP/System
B.
Set Mode to Enable SNMP service and specify
SNMP version then change the Read and Write
Community access strings if required and set the
engine ID
C.
In the SNMP Trap Configuration table, enable
Trap mode to allow the switch to send SNMP
traps. Specifies the trap version, trap community
and IP Address of management PC/NB which
will receive the trap messages. Select inform
mode for SNMP v2c and SNMP v3 clients. Set
Security engine ID for SNMP v3 client.
D.
Click Save to apply the setting or Reset to restore
the previous setting.
Summary of Contents for NEXT-POE4008L2-130
