1.1 General Safety Instruc ons
To reduce the risk of burns, fire, electrical shock, or injury:
• Use the pla orm for its intended use only, according to the instruc-
ons.
• Always turn all switches off and unplug the pla orm from the electrical
outlet before hardware installa on, maintenance, servicing, or repairs.
Hazardous voltages may s ll be present in the power supply even sev-
eral minutes a er it has been turned off.
• Indoor use only - do not store or use the product outdoors.
• Keep the pla orm away from heat sources, high humidity, water, and
other liquids. Do not store in a very cold space where condensa on
may occur.
• Keep all component guards and shields in place and do not touch the
internal components when the pla orm is powered on.
• Do not disassemble the product. Any tampering with or altering the
product will void the warranty, poses a serious risk of electric shock,
and may irreparably damage the product.
• Do not cover the vents.
• Keep the power cord plug and the socket clean and dust-free.
• Protect the power cord from damage by being stepped on, rubbed
against, or pinched.
• Do not use the pla orm if the ambient temperature is below 4 degrees
of Celsius or above 45 degrees of Celsius.
• Do not use the pla orm and contact technical support at
if it has been damaged, or any component is bro-
ken or missing.
• Stop using the pla orm immediately and contact technical support at
if you no ce or smell smoke, hear un-
usual noise, or otherwise suspect that it is not working properly.
• Do not use a achments or replacement parts not recommended or
approved by the manufacturer. Do not replace the power cables pro-
vided with the product. Use cer fied power and USB cables only.
• Connect the pla orm to a properly grounded outlet only, paying at-
ten on to the polarity of the socket. See grounding instruc ons.
• Turn the pla orm off when not in use.
• Unplug the pla orm from the power source if not used for an extended
period of me or during a lightning storm.
Product Manual
4
