4.8 Ferrite Core Installa on
Once you choose which power cable will be used in your setup, install the
a ached ferrite core. Make sure to place the core on the power cable as
close to the mo on pla orm as possible.
4.9 Connec ng to PC and So ware Installa on
Once the mo on pla orm is securely installed:
1. Plug in the power cord and turn on the mo on unit. As soon as it is on,
the pla orm will perform the ini al posi on calibra on, moving the
cockpit. A er a few seconds, the green light will come on, indica ng
that the unit is ready to use.
Product Manual
18
