Instructions for using the Checkit®
Go
IMPORTANT:
It is crucial that the dye is
dispensed into the center of each well.
Avoid splatter or dispensing air bubbles.
1. Fill it
2. Dispense it
Draw dye into the
pipette or robot
’
s tips.
Pipette the dye
into the wells.
3. Flip it
Using light force, flip up the
8-well tab with your finger or
pipette tips to fully vertical.
4. Check it
RS18-0101B
In a few seconds, use the
graduations to determine
the dispensed volume.
