Operator’s Manual for the Bullet Blender
®
6
years for all models.
The warranty is void if the product
is defective due to product accident,
product modification, exposure to
radiation other than for sterilization,
connection to an improper electrical
supply, lack of proper maintenance,
contamination, improper installation
or misuse. If the product is used in a
manner
not
specified
by
the
manufacturer, the protection provided
by the equipment may be impaired.
The warranty shall also not apply to
defects arising from fire, flood,
lightning or other conditions unrelated
to correct operation of the product.
Next
Advance’s
liability
is
limited, at the company’s election, to
(1) refund of the original purchaser’s
purchase price for the product (2)
repair
of
the
product,
or
(3)
replacement
of
the
product
or
defective parts. Evidence of purchase
by the original purchaser is required.
Next Advance may also request
documentation of proper maintenance,
if applicable.
Next Advance makes no other
warranty, express or implied, with
respect to its Products. Next Advance
makes no warranty respecting the
merchantability of the products or
their suitability or fitness for any
particular purpose or use.
Next Advance shall not be liable
for, indirect, special, incidental or
consequential damages of any nature.
Any recovery for any claim shall be
limited to the original purchase price
for the product. The operator is
responsible for providing proof of
purchase and providing normal care
and maintenance.
WARNINGS AND CAUTIONS
Please read the following warnings
and precautions before operating:
•
Do not operate Bullet Blender 50-
DX instruments with fewer than 2
sleeves in place.
•
Do not open lid or cover when the
Bullet Blender is in use.
•
Do not insert fingers or objects
other than recommended tubes
into sample tube holes.
•
Use caution when closing
Bullet Blender lid- do not close
on fingers.
•
Use recommended tubes only.
•
No user serviceable parts are
inside. For indoor use only.
•
Pollution Degree 2 per EN 61010-1.
•
Overvoltage Category II per EN
61010- 1.
•
Enclosure Protection: Not
protected against the ingress of
moisture.
•
Do not immerse in liquid.
