NXBT S130
15
3.
Following your phone user guide to activate Bluetooth device search on the phone
side, on your phone screen you will see a list of Bluetooth equipment found by the
phone at the end of the searching process. Select this Bluetooth handsfree from
the list “NXBT S130”, and initiate pairing following handset’s on-screen prompts.
4.
Continue to follow on-screen prompts to enter passkey “0000”and confirm to pair
the handsfree with your handset. Once the pairing procedure is completed, you will
hear 2 high tones, and then Blue LED gives 1 quick blinks per 2 seconds. It
indicates that the handsfree device and the handset are paired and connected.
Note
：
Your handsfree will remain in the pairing mode for about 2 minutes. If paring cannot be
finished within 2 minutes, the handsfree will enter into the standby mode (without
Bluetooth connection in this case), and Blue and Red LEDs will stop alternating
continiously, with Blue LED blinking per 3 seconds instead. You need to turn the
handsfree off and then repeat the above steps 2-4 to restart the pairing process.
If you want to use the device with another mobile phone, you must repeat the pairing
process again. You can also follow the user guide of the Bluetooth equipment to
complete paring operations on the equipment side.
