Item
Contents
address. This is only displayed if
AutoStatusEmail for Recipient N
is
something other than
Disabled
.
Network/Disk/RAID/Host/Misc/
App Alerts for N
The kinds of events (
Errors
,
Warnings
,
Information
, or
System
) for
each category that are sent to the recipient. If no events in a
particular category are configured, the entry is not displayed.
Friendly name
The user-defined “friendly” name of the system.
Current emailer status
Indicates how many emails are queued to be sent.
E-Alerts are sent from the management port. E-Alert settings are configured on the
E-Alert Settings
page (see
on page 212) except for
Friendly Name
, which is configured on the
Configure Enclosure
page
(see
SNMP Traps
Table 3-17: SNMP Traps
Item
Contents
IP address N for SNMP traps
The IP address that SNMP traps are sent to. One or two IP address can
be specified.
Community string
The SNMP password. By default, this is
public
.
Trap version
The type of SNMP trap that is sent: SNMPv1 (abbreviated
1
) or
SNMPv2c (abbreviated
2c
).
Test String
Text that is sent to test the SNMP trap.
When to send SNMP traps
Indicates when SNMP traps are sent: on errors; on warnings and errors;
on information, warnings, and errors; or for all events. It can also be set
to
Disabled
, meaning that no SNMP traps are sent.
SNMP trap settings are configured on the
SNMP/SYSLOG Settings
page (see
Time Server
Table 3-18: Time Server
Item
Contents
Auto set time and date
Indicates whether the time and date are configured to be automatically
updated by a time server.
Time Server Protocol
The method by which the time server updates the unit’s time and date:
Daytime
or
SNTP
.
Chapter 3: The Graphical User Interface — System Information
Nexsan High-Density Storage
User Guide
99