Audible Alarm
Clicking
System Admin > Alarm
takes you to the
Audible Alarm
page, which allows you to silence or sound
the audible alarm on the unit.
Figure 3-138:
Audible Alarm
page
If the alarm is sounding, click
Silence the Audible Alarm
to silence the alarm. (To find out why the alarm is
sounding, click the notification in the upper right corner to be taken to the
Problem Summary
page. See
on page 104 for more information.)
Note
If further problems occur, the audible alarm will sound again.
If the alarm is not sounding, click
Re-Sound the Audible Alarm
to sound the alarm (if a problem is present—
see
Audible alarms can be turned off entirely in the
Audible Alarm Settings
section. This may be useful if, for
instance, the unit is installed in an environment where an alarm would not be heard.
►
To activate or deactivate audible alarms:
1. In the
Audible Alarm Settings
section, select either
High
or
Off
for the
Audible Alarm Volume
.
Note
If the
Audible Alarm Volume
is set to
Off
, alarm indications in the graphical user interface are still
displayed, but no sound will be heard from the unit.
2. Click
Save Settings
.
A message appears, letting you know that the setting has been saved. Click the
Back
button to return to the
Audible Alarm
page.
Chapter 3: The Graphical User Interface — System Administration
Nexsan High-Density Storage
User Guide
192