Summary of System Problems
Clicking
System Information > Problems
, the “Failure” indicator in the upper right corner of any page, or the
Problem Summary
button on the
Home
page takes you to the
Summary of System Problems
page, which
displays a list of any current problems that the unit is experiencing. When there are no problems, the
Summary of System Problems
page looks like this:
Figure 3-47:
Summary of System Problems
page, displaying no problems
However, when problems exist, the
Summary of System Problems
page looks like this:
Figure 3-48:
Summary of System Problems
page, displaying a problem
Each problem that the unit is experiencing is listed, with a
Number
indicating its order of occurrence and a
Description
that gives a summary of the problem and the component that it is related to.
Clicking the
Beacon
button causes the LEDs on the front of the unit to flash for one minute. This can help in
locating a specific unit in a large installation where multiple Nexsan High-Density Storage units are located.
Clicking the
Silence Alarm
button causes the audible alarm on the unit to stop sounding.
Note
If further problems occur, the audible alarm will sound again.
More information about each problem can be obtained by going to the information page for the indicated
component (see
on page 62 or
Chapter 3: The Graphical User Interface — System Information
Nexsan High-Density Storage
User Guide
104