2. If the storage unit is not already selected, select it in the list.
Figure 1-4: Nexsan IP Configuration Tool
RAID Systems
list
3. Select
Use DHCP
or
Use Static IP
for each controller in the unit. If you select
Use Static IP
, then you
must fill in the
IP Address
and
Subnet Mask
. If you wish to use the E-Alert feature (see
on page 26) or use a time server (see
on page 28), you may also need to
fill in values for
Gateway
,
Primary DNS
, and
Secondary DNS
. See
page 210 for more information.
Note
In order to use DHCP, your network must be configured for DHCP. If it is not, you MUST use a
static IP address.
4. Click
Apply Changes
.
Note
If any items remain orange, fill in the necessary information and click
Apply Changes
again.
Accept the End User License Agreement (EULA)
►
To accept the End User License Agreement:
1. Access the Nexsan High-Density Storage unit’s graphical user interface (GUI) using one of the following
methods:
Using Nexsan Storage Manager
(Windows systems only):
a. Open Nexsan Storage Manager.
b. In the
RAID Systems
list, select the Nexsan High-Density Storage system.
c. Click
Manage system
.
Using a web browser
(all systems):
Chapter 1: Basic Setup — Accept the End User License Agreement (EULA)
Nexsan High-Density Storage
User Guide
19