PRESET
P8
Page
7
/
18
PRESET
Please consult nexo-sa.com for NEXO TD Controllers firmware information.
For the P8, the following setups are available:
→
MAIN is the recommended setup for most FOH application.
→
MONITOR is recommended for monitor applications. Warning: this setup is a low latency setup and therefore its phase is not
compatible with other NEXO cabinets, including subs.
Preset
•
P8 MON PA 100100, with high-pass at 66, 85 or 120 Hz.
•
P8 MON PA 11060, with high-pass at 66, 85 or 120 Hz.
•
P8 MAIN PA 100100, with high-pass at 66, 85 or 120 Hz.
•
P8 MAIN PA 11060, with high-pass at 66, 85 or 120 Hz.
P8
Front of house and stage monitor applications