NX242 REMOTE CONTROL PAGE
Virtual NX242 TDcontroller direct access
At the top of the GUI, a virtual NX242 front panel allows real-time control of all NX242
function(s). The screen (identically) emulates a real NX242 screen – every buttons is
functional and the jog wheel can be controlled by clicking on the left/right arrows.
INPUT box
A radio button selects between 4 digital inputs and 2 digital inputs plus 2x analogue
inputs. Dependent on this choice the Input box will differ slightly.
In both cases an “array EQ gain” is present. The value of the gain can be typed
directly into the text box.
Digital IN
The four input bar graphs display on a logarithmic scale
the input signal. 0dB is the digital full-scale value, where
the AD converter clips. When clipping occurs the whole
bar graph becomes red. –12dB zone is orange. The
dynamic of the bar graph is 96dB. Above the bar graph,
the EtherSound channel is displayed (also visible in the
routing tab of the ESmonitor).
Headroom settings have no meaning in digital IN and
are not present. (The goal of the headroom is to adjust
the Analogue Gain in drive the AD converter full scale)
NXTENSION USER MANUAL
DOCUMENT REVISION 150305
PAGE
10
