MSUB15
-
ACCESSORIES
Page 5/16
4
MSUB15
-
ACCESSORIES
WARNING
All MSUB15 accessories are specifically rated in agreement with structural computations.
Never use other accessories
– including push-pins – when assembling MSUB15 cabinets than the ones provided by NEXO: NEXO
will decline responsibility over the entire MSUB15 accessory range if any component is purchased from different supplier.
All MSUB15 accessories have been designed so that cabinet are arrayed vertically.
VNT-BUMPM10
-
Rated for a maximum of 12 GEOM10 or 8 MSUB15.
-
Maximum quantity for flown vertical cluster is:
N
GEOM10
+ 1.5*N
MSUB15
<= 12
-
2 rigging points 2 points with retractable rings.
-
Usable with VNT-EXBARM10 for a one rigging point.
-
Ground stack assembly alone, or with VNT-GSTKM10S /
VNT-GSTKM10L.
-
2 locations for laser/inclinometer.
-
On each side, an arrow indicates the front.
NO TILT
– MSUB15 MUST ALWAYS BE POSITIONNED ON THE TOP THE ARRAY
VNT-EXBARM10
Negative Tilt
Positive Tilt
