ACCESSORIES
Page
8
/
18
ePS10
ACCESSORIES
WARNINGS
All ePS accessories are specifically rated in agreement with structural computations.
Never use other accessories when assembling ePS
10
cabinets than the ones provided by NEXO: NEXO will decline
responsibility if any component is purchased from different supplier.
PROHIBITED: ePS
10
below ePS
10
or ePS
10
below eLS
600
without dedicated accessory
VNU-BUMP
LiftBar, can be used with VNI-WMADAPT.
Remove 2 screws on the top
Screw VNU-BUMP to ePS10 (use only
screws provided with VNU-BUMP).
Tight properly.
Refer to the Product Data Sheet
VNU-HBRK535
Horizontal Cradle, usable with:
VNI-CLADAPT.
VNI-WM330.
VNU-PLADAPT
Remove the M10 inserts from each side.
Place HBRK535 on ePS10, use only
fasteners provided. Tight properly.
Refer to the Product Data Sheet
