PAGE 2 OF 2
- Read t his docum ent before using.
- Keep t his docum ent .
- Observe all warnings and caut ions.
Dimensions
Warnings
Ensure that the mounting location and
fasteners can support at least 4 times the
weight of all the installed cabinets,
auxiliary equipment and cables.
Use only the provided screws (thread
lock coated) and accessories.
Assemby
Remove the screws on both sides.
Assemble the Plates on each side of eLS600 using the M10x20 screws.
Place the assembly below the frame plate.
Pay attention to the mounting direction, see the
mark on the top frame.
Fasten the M10x30 screws.
Remove the screws on both sides of ePS10.
Place ePS10, fasten with M10x20 and M6x25
screws.
•
NEXO cannot accept responsibility for accidents caused by any factor other than defects in this product itself.
•
Please check the web site nexo-sa.com for the latest update.
