Nexo eLS400, User Manual

Page: 5 / 14

DESCRIPTION
eLS600
Page 5 / 14
DESCRIPTION
→
eLS600 is a compact and powerful subwoofer, ideal complementing ePS8 and ePS10.
→
eLS600 is equipped with 2 pairs (In/Out) of screw terminal blocks, permissible cables from 0.75 mm
2
to 3.31 mm
2
(12 to 15 AWG) copper section. Cable with maximum outside diameter of 11mm.
→
To wire eLS600, slit the membrane of the grommet crosswise, pass the cable through and make the connection to the screw
terminals. Place the IPCOV.
→
IP54: be careful to place the IPCOV correctly.
→
Amplification
•
The eLS600peakers must be used with a NEXO processor to handle EQ, phase alignment, crossover, and
excursion/thermal protection for the system loudspeaker.
•
The following table shows the number of ePS speakers and eLS600 subwoofers usable with each solution.
DTD + DTDAMP4X0.7 DTD + DTDAMP4X1.3 NXAMP4X1mk2 NXAMP4X2mk2 NXAMP4X4mk2
ePS8 Up to 2 per channel Up to 2 per channel Up to 4 per channel * Up to 4 per channel Up to 4 per channel
ePS10 X Up to 2 per channel 1 per channel * Up to 4 per channel Up to 4 per channel
eLS600 X 1 per channel 1 per channel * Up to 2 per channel Up to 2 per channel
* Recommended powering solution