Functionality
The XC-820 runs our API which provides serial output when a specific sensor Element is triggered (for example a pick-up, or
-motion sensor or touch button) and provides control over output Elements (for example controlling RGBW LED strips) via
serial input commands. These API serial commands are typically used to create interactive Xperiences for Digital Signage.
The complete API Manual and additional helpful documents can be found on
https://nexmosphere.com/support-
. To get you started, we’ve included some starter examples of our Elements and the corresponding API serial
commands on the following pages.
3rd party devices and software
This Quick Start Guide offers a generic explanation of the setup and operation of the XC-820 Xperience controller. It does
not cover information on how to integrate the Controllers, Elements and their API triggers in specific 3rd party devices or
software. We have manuals available with step-by-step instructions on how to integrate Nexmosphere products with the
products of our hardware, -and software partners. You’ll find these on the support and partner pages of our website.
N ex m o s p h e re
H i g h Te c h C a m p u s 1 0 ( M μ b u i l d i n g )
5 6 5 6 A E E i n d h ove n • T h e N e t h e r l a n d s
T
+ 3 1 4 0 2 4 0 7 0 7 0
E
s u p p o r t @ n ex m o s p h e re.c o m
QUICK START GUIDE
XC-820 XPERIENCE CONTROLLER
© 2020 Nexmosphere. All rights reserved. v1.0 / 07-20
All content contained herein is subject to change without prior notice.
2
Example 1 | RGBW LED control
To control an RGBW LED strip connected to RGBW channel A or B send one of the following API example commands from
the 3rd party device to the XC-820 controller:
Set the LED strip connected to RGBW channel
A
to color
0
(default white*) at
80
% brightness with
0.5
seconds ramp time:
*
An overview of the default RGBW LED colors is provided on the final page of this document.
Set the LED strip connected to RGBW channel
B
to color
3
(default blue*) at
100
% brightness with
1.2
seconds ramp time:
Set the LED strip connected to RGBW channel
A
to pulse between two ramps. Ramp1: Color
2
(default green*) at
100
% with
1.0
seconds ramp time. Ramp 2: Color
2
(default green*) at
5
% with
0.5
seconds ramp time.
Set the LED strip connected to RGBW channel
B
to pulse between two ramps. Ramp1: Color
6
(default turquoise*) at
80
%
with
0.7
seconds ramp time. Ramp 2: Color
8
(default pink*) at
100
% with
0.7
seconds ramp time.
Set the LED strip of all 2 RGBW channels (
X
) to color
5
(default purple*) at
65
% brightness with
0.8
seconds ramp time:
G005B[A 0 80 5]
G005B[B 3 100 12]
G005B[A 2 100 10 2 5 5]
G005B[B 6 80 7 8 100 7]
G005B[X 5 65 8]
XC-820
(Xperience controller)
USB-A to Micro-USB cable
(connect to 3rd party device)
DC Power supply
(24V)
XC
A
B
