Nexia Bridge Quickstart Guide
5
Light
Condition
Orange
(Z-Wave)
slow blink
Waiting for enrollment or exclusion to begin
fast blink
Enrollment or exclusion is taking place
solid
At least one Z-Wave device was enrolled or
excluded
flicker
Z-Wave activity is detected on local network
Green
(Server)
solid
Connected to the server
flicker
Information is being exchanged with server
2 blinks
Bridge does not have an IP address. Verify
that bridge is connected to router and that
router DHCP is enabled
3 blinks
Bridge has contacted server but connection
was denied. Verify correct MAC address. If
problem persists, call us.
no light
(but orange
light is solid)
Ethernet cable not connected
u s i n g Y O u R s Y s T E M
Need HeLp?
For installation help
and videos, visit
nexiahome.com
For assistance, call
877-288-7707
Everything you need—from step-by-step instructions to
short, helpful videos—is located right at your fingertips in
the Nexia web portal. You’ll be able to run your home from
wherever in no time at all!
Light
Condition
Blue Schlage
solid
Bridge is powered by A/C
slow blink
Bridge is powered by battery
Blue, Green and Orange
solid
low battery, when bridge not connected to
A/C and battery is installed
no light
No A/C or battery
Green and Orange
blink for
5 seconds
Occurs during reset. After reset, orange light
will continue to blink for 5 seconds.
Ethernet
lights
solid or
blinking
Internet connected
»
hELPFUL TIPS:
Verify you have an open router port and outlet to connect to
the Nexia Bridge.
Place the Nexia Bridge in an open space. Avoid setting it atop
other electronic devices or in metal enclosures.
UNDErSTANDING ThE BrIDGE—ADvANcED INFOrMATION