Copyright © 2013 NEXCOM International Co., Ltd. All Rights Reserved.
3
Chapter 1: Product Introduction
VTC 7200-BK Series User Manual
Hardware Specifications
CPU
▪
Intel
®
Core™ processor dual core i7-5650U, 2.2GHz
▪
Intel
®
Core™ processor dual core i7-4650U, 1.7GHz
▪
Intel
®
Core™ processor dual core i5-4300U, 1.9GHz
▪
Intel
®
Core™ processor dual core i3-5010U, 2.1GHz
▪
Intel
®
Core™ processor dual core i3-4010U, 1.7GHz
Memory
▪
2 channel 204-pin DDR3L SO-DMIM socket support 1333/1600MHz up to
16GB, default industrial grade 2GB
Storage
▪
2x 2.5” SATA 3.0 SSD/HDD (removable & hot swappable), RAID 0,1 supported
(optional lockable storage available)
▪
1x CFast (externally accessible)
Expansion
▪
1x full size Mini-PCIe socket (USB 2.0)
▪
1x full size Mini-PCIe socket (USB 2.0 + PCIe)
▪
1x full size Mini-PCIe socket (USB 2.0 + PCIe)
▪
1x half size Mini-PCIe socket (USB 2.0 + PCIe)
GNSS Function
▪
1x u-blox NEO-M8N module (support GPS/Gloness/QZSS/Galileo/Beidou)
or optional module with Dead Reckoning
▪
Built-in G-sensor
I/O Interface-Front
▪
4x LED for power, storage, WWAN, WLAN
▪
2x 2.5” SATA 3.0 SSD/HDD (removable & hot swappable), RAID 0,1 supported
(optional lockable storage available)
▪
1x dual USB type A connector for USB 3.0 port + USB 2.0 port
▪
2x externally accessible SIM card socket (selectable)
▪
1x phone jack 3.5mm for 1x Mic-in
▪
1x phone jack 3.5mm for 1x Line-out
▪
1x externally accessible CFast card socket with cover
▪
1x event button (trigger type)
▪
1x reset button
▪
3x antenna hole for WWAN/WLAN/BT
I/O Interface-Rear
▪
1x 9~36VDC input with ignition and 37W typical power consumption
▪
1x dual USB type A connector for USB 3.0 port + USB 2.0 port
▪
2x RJ45 10/100/1000 Fast Ethernet with LED
▪
1x phone jack 3.5mm for 1x Mic-in
▪
1x phone jack 3.5mm for 1x Line-out with 1.5W output each
▪
1x DB-15 VGA. Resolution up to 2560 x 1600 @60Hz
▪
1x DP port. Resolution up to 2560 x 1600 @60Hz
▪
2x DB-9 RS-232
▪
1x DB-9 RS-232/422/485 (RI/12V selectable)
▪
1x DB-9 for CAN 2.0B (optional CAN Bus 2.0B mini-PCIe card),
2x MCU-DI and 2x MCU-DO
▪
1x 16-pin terminal block
- 1x CAN Bus 2.0B (on board)
- 1x optional CAN/OBDII module (CAN Bus 2.0B or OBDII SAE J1939)
- 8x programmable GPIO
(Digital Input)
Input voltage (internal type): 5VDC TTL (default)
Input voltage (source type): 3~12VDC
(Digital Output)
Digital Output (sink type): 5VDC TTL (default), max current: 20mA
Digital Output (source type): 3~24VDC, max current: 150mA
▪
1x 12VDC output (2A), SM Bus