PEAK 870 User’s Manual
8
Chapter 1
Display
Intel® 945G GMCH Integrated Intel® GMA 950, Max 128 MB of DVMT for graphics
memory allocation
Analog display support up to 2048 x 1536 @ 85 Hz for CRT
Audio
AC
'
97 Audio Codec, Realtek ALC655
3 x (1x4 pin header) for Line in /Line out /MIC in
Watchdog Timer
1-minute increments from 1 to 255 minutes
1-second increments from 1 to 255 seconds
On-board RTC
On-chip RTC with battery backup
1 x External Li-lon battery
I/O Interface
USB 2.0: 8 ports (4 on board, 4 to backplane), bandwidth: 480 Mb/s
Serial port: 2 port, with 2x5pin headers (COM 2 support RS232 / RS422/RS485)
IDE: 1 x 40-pin connector. Support Ultra ATA 100/66/33
Disk on Module: 1 x 2-pin power connector for DOM
SATA HDD: 4 ports,Support RAID 0.1
Parallel port: 1 x 26-pin connector
Floppy: 1 x 34-pin connector
GPIO: Supports 4 sets general purpose I/O each with TTL level (5 V) interface
On-board buzzer / 2-pin power on button switch
SMBus 2.0 (2-pin header) to backplane
On-board 2-pin header for reset / 4-pin for speaker
5-pin for key lock/power LED / HDD Power LED
1 x 4-pin fan connector (for CPU); 2 x 3-pin fan connectors (for System)
1 x 5-pin JST connector for chassis or backplane front Keyboard/Mouse
I/O On SBC Bracket
1 x VGA DB-15 connector
2 x RJ45 Gigabit Ethernet LAN port
1 x PS/2 Keyboard/Mouse
System Monitor
8 voltages (For +1.5 V, +3.3 V, +5 V, -5 V, +12 V, -12 V, Vcore and +5 Vsb)
2 temperature
3 fan speed monitors