Copyright © 2019 NEXCOM International Co., Ltd. All Rights Reserved.
56
NViS 6308 Series User Manual
Chapter 4: BIOS Setup
Power Management
This section is used to configure the power management features.
Power Saving(ERP) Control
Enables or disables power saving mode function.
Restore AC Power Loss
Select the AC power state when power is re-applied after a power failure.
RTC wake system from S5
Enables or disables system wake up from S5.
Fixed Time:
System will wake on the hr:min:sec specified.
Dynamic Time: System will wake on the current time + increase minute(s).
Advanced
Version 2.18.1263. Copyright (C) 2019 American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2019 American Megatrends, Inc.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Configure power mode for power
saving function.
Power Management
Power Mode
Power Saving(ERP) Control
Restore AC Power Loss
Wake Events
RTC wake system from S5
[ATX Type]
[Disabled]
[Always Off]
[Disabled]
