Distance Optimization:
Specify the ACK timeout by entering the value manually. ACK
timeout can be entered by defining the link distance. Too short value of the ACK timeout
may cause transmission time out and no packet can be received. Too long value may
cause low throughput rate.
Fragmentation Threshold:
Default=off.
Specify the Fragmentation threshold by entering
the value manually [300-2346 bytes]. This is the maximum size for a packet before data is
fragmented into multiple packets. Setting the Fragmentation threshold too low may result in
poor network performance. Only minor modifications of this value are recommended
RTS/CTS Threshold:
Default=off
. RTS/CTS (Request to Send / Clear to Send) is the
optional mechanism used by the 802.11 wireless networking protocol to reduce frame
collisions introduced by the hidden node problem. RTS/CTS is an additional method to
implement virtual carrier sensing in Carrier sense multiple access with collision
avoidance (CSMA/CA). Specify the RTS threshold by entering the value manually [0-2346
bytes]. Typically, sending RTS/CTS frames does not occur unless the packet size
exceeds this threshold.
This
Interface Configuration
section covers SSID’ operation mode and encryption.
<General setup>
ESSID:
Edit the SSID or Mesh ID.
Mode:
Select operation mode
AP
Client Router
802.11s ( Mesh mode)
<Wireless Security>
Summary of Contents for NIO200
Page 1: ...NIO200WMR User Manual V1 2 ...
Page 22: ......
