Nexcom NIO200 HAG, User Manual

Page: 21 / 120

NIO200 HAG User Guide Page 21 of 120
In addition, when you select a service, information about the service parameters will be shown in the
Service details section at the bottom of the page.
The service information includes the following parameters:

Service ID
– the service identifier based on the service owner,



Application domain
– the type of service,



Source/destination device
– the EUI64 address of the source device, and the destination
device respectively,



SourceFlag
– indicates if selected device is the source of the communication,



SinkFlag - indicates if selected device is the destination of the communication. If both
SourceFlag and SinkFlag are set, indicate a bidirectional communication between selected
device and the destination of service,



IntermittentFlag - indicates if the service is used for acyclic/intermit communication,



Period
– the frequency for generating packets for cyclic communication (burst messages),



RouteID
– the ID of the route assigned to the service (each service having one Route ID
assigned by Network Manager,



Timestamp
– the time and date the service was created.

6.3 Devices
The devices page features the list of devices that exist in the network and a search form that enables you
to search devices based on their EUI-64 address, tag and/or state.