Copyright © 2014 NEXCOM International Co., Ltd. All Rights Reserved.
46
NEX 885 User Manual
Chapter 3: BIOS Setup
Primary Display
Select which of IGFX/PEG/PCI graphics device should be primary display or
select SG for switchable GFx.
Primary PEG
Select which PEG device should be the primary PEG.
Primary PCIE
Select which PCIE device should be the primary PCIE.
System Agent (SA) Configuration
This section is used to configure the System Agent (SA) configuration.
Chipset
Version 2.15.1236. Copyright (C) 2012 American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Check to enable VT-d function
on MCH.
VT-d
► Graphics Configuration
► NB PCIe Configuration
► Memory Configuration
VT-d
Enables or disables VT-d function on MCH.
Graphics Configuration
Configures the graphic chip settings.
NB PCIe Configuration
Configures the NB PCI Express settings.
Memory Configuration
Configures the memory settings.
Graphics Configuration
This section is used to configure the Intel
®
IGFX configuration.
Chipset
Version 2.15.1236. Copyright (C) 2012 American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Select which of IGFX/PEG/
PCI Graphics device should be
Primary Display Or select SG for
Switchable Gfx.
Graphics Configuration
Primary Display
Primary PEG
Primary PCIE
Internal Graphics
Aperture Size
DVMT Pre-Allocated
DVMT Total Gfx Mem
Primary IGFX Boot Display
[Auto]
[Auto]
[Auto]
[Auto]
[256M]
[32M]
[256M]
[VBIOS Default]
