manualshive.com logo in svg

Nexcom NDiS M324, User Manual

Share
Download
Nexcom NDiS M324 User Manual Download Page 64

Copyright © 2013 NEXCOM International Co., Ltd. All Rights Reserved.

50

NDiS M324 User Manual 

Chapter 4: BIOS Setup

Boot

This section is used to configure the boot features.

Bootup NumLock State

This allows you to determine the default state of the numeric keypad. By 
default, the system boots up with NumLock on wherein the function of the 
numeric keypad is the number keys. When set to Off, the function of the 
numeric keypad is the arrow keys.

Boot Option Priorities

Adjust the boot sequence of the system. Boot Option #1 is the first boot
device that the system will boot from, next will be #2 and so forth.

Advanced

Security

Boot

Save & Exit

Main

Version 2.16.1242. Copyright (C) 2013 American Megatrends, Inc.

Aptio Setup Utility - Copyright (C) 2013 American Megatrends, Inc.

→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit

Select the keyboard NumLock 
state

Boot Settings Configuration

Bootup NumLock State

Boot Option Priorities

Boot Option #1

[On]

[UEFI: Built-in EFI . . .]

Save & Exit

Advanced

Boot

Security

Save & Exit

Main

Version 2.16.1242. Copyright (C) 2013 American Megatrends, Inc.

Aptio Setup Utility - Copyright (C) 2013 American Megatrends, Inc.

→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit

Reset the system after   

saving the changes.

Save Changes and Exit

Discard Changes and Exit

Restore Defaults

Save & Exit

Save Changes and Exit

To save the changes and exit the Setup utility, select this field then press 

<Enter>. A dialog box will appear. Confirm by selecting Yes. You can also 

press <F4> to save and exit Setup.

Discard Changes and Exit

To exit the Setup utility without saving the changes, select this field then 

press <Enter>. You may be prompted to confirm again before exiting. You 

can also press <ESC> to exit without saving the changes.

Restore Defaults

To restore the BIOS to default settings, select this field then press <Enter>. A 

dialog box will appear. Confirm by selecting Yes.

Summary of Contents for NDiS M324



































































Reviews:

No comments

Brands by name

Popular brands

Load more brands