Copyright © 2021 NEXCOM International Co., Ltd. All Rights Reserved.
71
NDiS B560 User Manual
Chapter 4: BIOS Setup
PCH-IO Configuration
This section is used to configure PCH-IO configuration.
Save & Exit
Advanced
Chipset
Security
Boot
Main
Version 2.20.1275. Copyright (C) 2021 American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2021 American Megatrends, Inc.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
SATA Device Options Settings
PCH-IO Configuration
SATA and RST Configuration
HD Audio Configuration
PCH LAN Controller
Wake on LAN Enable
State After G3
[Enabled]
[Enabled]
[S0 State]
►
►
PCH LAN Controller
Enables or disables onboard NIC.
Wake on LAN
Enables or disables integrated LAN to wake the system.
State After G3
Configures the power state when power is re-applied after a power failure
(G3 state).
SATA And RST Configuration
Save & Exit
Advanced
Chipset
Security
Boot
Main
Version 2.20.1275. Copyright (C) 2021 American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2021 American Megatrends, Inc.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Enable/Disable SATA Device.
SATA and RST Configuration
SATA Controller(s)
SATA Mode Selection
SATA Test Mode
M.2-M(H310 Only):
SATA (Q370/H310):
M.2-B(Q370 Only):
M.2-M(Q370 Only):
[Enabled]
[AHCI]
[Disabled]
Empty
TOSHIBA MQ04AB
(1000.2GB)
Empty
Empty
SATA Controller(s)
Enables or disables the SATA controller.
