Nexcom EBC 580, User Manual

Page: 9 / 30

EBC 580 User’s Manual 8 Chapter 1
„ EBK PCI1
„ EBK PCIR2
„ EBK PCIR3
I/O on Bracket
- Mic-in
- Speaker Out
- VGA DB-15 connector x 1
- RJ45 Gigabit Ethernet LAN port x 2
- USB x 2
- Mini-DIN for Keyboard/mouse x 1
System Management
- Derived from Super IO to support system monitor.
- Monitoring of
5
voltages,
3
temperature and
2
fans Speed.
5 voltage (For +3.3V, +5V, +12V, Vcore and +2.5V)
3 Temperatures (CPU, two external Temperature Sensor)
2 FANs speed (CPU and System FANs).
- Watchdog timeout can be programmable by Software from 1
second to 64 Sec.
Real Time Clock
- On-chip RTC with battery back up
- External Lithium battery x 1
Watchdog Timer
- 1-minute increments from 1 to 255 minutes
- 1-second increments from 1 to 255 seconds
Dimensions
- 203mm(L) x 143mm(W)
Power Supply
- Three Pin Headers for AT/ATX mode switch
- +3.3V is converted from +5V
- 6 PIN Power Input Connector
- 3 PIN Jst connector to receive the 5Vsb input from Power Source
- Factory Default Setting is AT Mode
- ATX Mode
„ Power Required: +12V/+5V/+5Vsb
„ Support Power On push Button, Software Shutdown
function and LAN1 remote wake up only.
„ Two Pin Header for Power On Push Button
„ BIOS default setting is as shown below:
¾ POWER -SUPPLY TYPE Î [ATX]
¾ AUTO PWR-FAILURE RESUME Î [ON]
- AT mode
„ Power Required: +5V/+12V
No Power On push Button, No Software Shutdown function and No
LAN1 remote wake up