Copyright © 2020 NexCOBOT Co., Ltd. All Rights Reserved.
36
NEX 913C User Manual
Chapter 3: BIOS Setup
ACPI Settings
This section is used to configure ACPI settings.
Advanced
Version 2.20.1271. Copyright (C) 2019 American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2019 American Megatrends, Inc.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Enables or Disables BIOS ACPI
Auto Configuration.
ACPI Settings
Enable ACPI Auto Configuration
Enable Hibernation
ACPI Sleep State
[Disabled]
[Enabled]
[S3 (Suspend to RAM)]
Enable ACPI Auto Configuration
Enables or disables BIOS ACPI auto configuration.
Enable Hibernation
Enables or disables system ability to hibernate (OS/S4 Sleep State). This
option may not be effective with some OS.
ACPI Sleep State
Select the highest ACPI sleep state the system will enter when the suspend
button is pressed. The options are Suspend Disabled and S3 (Suspend to
RAM).
Super IO Configuration
This section is used to configure the serial ports.
COM1 to COM6
Configuration settings for serial port 1 to port 6.
CHASSIS OPEN
Enables or disables case open detection function.
Advanced
Version 2.20.1271. Copyright (C) 2019 American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2019 American Megatrends, Inc.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Set Parameters of Serial Port 1
Super IO Configuration
Super IO Chip
COM1
COM2
COM3
COM4
COM5
COM6
CHASSIS OPEN
[Disabled]
