1- Insert the tail wheel pushrod into the hole on the tail gear control horn (as show).
2- Install the tail wheel control horn in place.
4- Secure the tail wheel control horn in place using a 2mm screw set,
Ensure smooth non-binding movement.
5- Installing the tail wheel hatch (H) in place using a four 2x10mm self tapping screws.
3
2
3- Instal the tail wheel gear in place.
1
4
5
2x8mm
screw
H
FRONT-VIEW
Remove the engine mount and drill a 5mm hole
through the fire-wall at each of the four marks marked.
Using a pencil or felt tipped pen, mark the fire wall where the four holes are to be drilled.
B
B’
B=B’
! Engine thrust on balk head
is already adjust at factory
Attach the engine mount beams onto the fire-wall so the distance between of two engine mount beams is “A”.
Secure the engine mount beams onto the fire-wall with litter CA glue.
A
...............2
Tail landing gear
..........1
............2
2x3mm screw
............4
2x18mm screw
.....1
Tail wheel control-
horn
2mm I.D collar
1.2x800mm tail wheel push rod
14- Tail wheel
YAK-9
15- Glow engine
YAK-9
15
5mm
! Align the mark on both mounts
with the mark on the fuselage
A
Pull the magnetic top hatch
out of the fuselage.
